Forklift Training Course Ontario

Forklift Training Course Ontario - Industry and federal regulators have established the criteria for forklift safety training according to their existing regulations and standards. Those wanting to use a forklift should complete a forklift training program prior to making use of one of these machinery. The accredited Forklift Operator Training Program is meant to offer those training with the practical skills and information to become an operator of a forklift.

There are forklift operation safety rules that must be followed pertaining to pre-shift checks, and rules for lifting and loading.

An inspection checklist should be completed and given to the supervising authority before beginning a shift. When a maintenance issue is uncovered, the utilization of the specific machine must be stopped until the problem has been addressed. To be able to indicate the machine is out of service, the keys should be removed from the ignition and a warning tag placed in a visible place.

Loading safety regulations include checking the forklift nameplate's rating capacity and knowing if the weight of the load falls within capacity. The forklift forks should be in the down position when the forklift is starting up. Bear in mind that there is a loss of around 100 pounds carrying capacity for every inch further away from the carriage that the load is carried.

Lifting must begin with the driver moving to a stopped position approximately three inches away from the load. The mast should then be leveled until it has reached a right angle with the load. Raise the forks to an inch below the slot on the pallet and drive forward. Next lift forks four inches. Tilt back the load to secure it for moving. Drive the lift backwards if the load obscures frontal vision. Check behind and honk in order to warn other staff. Never allow forks to drag on the ground.

Forklift loads must be loaded in such a way that they are secure and do not create a hazard to other people or objects. Restraining loads is required for materials which could shift during transport and destabilize the forklift.

So as to prevent the movement of drums, drums can be strapped together to lessen movement. Forklift operators should drive slowly when transporting liquids, to lessen instability in the forklift.

Click to Download the pdf