Forklift Training Schools Ontario

Forklift Training Schools Ontario - The Benefits Of Taking One Of Our Forklift Training Schools

If you are looking for work as an operator of a forklift, our regulatory-compliant forklift training Schools offer excellent instruction in various types and styles of forklifts, classes on pre-shift inspection, fuel types and handling of fuels, and safe operation of a forklift. Practical, hands-on training assists participants in obtaining basic operational skills. Course content includes current rules governing the use of forklifts. Our proven forklift Schools are meant to provide training on these kinds of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

Whilst the forklift is in use, do not raise or lower the forks. Loads should not extend higher than the backrest. This is due to the possibility of the load sliding back in the direction of the operator. Inspect for overhead obstructions and make sure there is sufficient clearance before raising a load. Stay away from overhead power lines. When the load is lifted straight up, tilt it back slightly.

The lift truck is less stable when a load is in a raised position. Make sure that no one ever walks underneath the elevated fork. The operator must not leave the forklift when the load is raised.

While handling pallets, forks must be high and level enough to go into the pallet and extend all the way beneath the load. The width of the forks must provide even weight distribution.

Chock the wheels and set the brakes before loading and unloading the truck. The floors must be strong enough to support the combined weight of the load and the forklift. Fixed jacks could be installed to be able to support a semi-trailer which is not attached to a tractor. The height of the entrance door must clear the height of the forklift by a minimum of 5 cm. Edges of rail cars, ramps and docks must be marked and avoid them.

Click to Download the pdf